GRP Ladders

Racolin’s GRP ladders are an ideal alternative in environments where galvanised steel will not last and stainless steel is just too expensive. Our ladders are light weight, easy to assemble and are non-conductive.

Racolin are able to supply 3 grades of ladders, to provide solutions when a wall is not present:
Standard Ladders:  Wall brackets required at 1750mm maximum centres Reinforced Ladders: Wall brackets required at 4000mm maximum centres
Super reinforced ladders: Wall brackets required at 6000mm maximum centres

In addition to the basic ladders, Racolin can offer a large range of accessories to compliment the ladder including:

Grade 316 stainless steel wall brackets
Grade 316 stainless steel foot brackets
Splice joints to enable ladders of any length with a continuous stringer
Handhold extensions (basic or return mounted)
Grade 316 stainless steel retractable handholds (walk-round or walk-through)
Safety cages
Foot treads
Drop bars
Grade 316 stainless steel safety chain sets
Lockable self closing gates

Ladders are usually supplied without the accessories fitted, for site assembly.

Key Features:
  • Box section stringers stiffer in torsion than channel section type
  • Reinforced ladders can be provided where bracket fixing are limited
  • Used by many water authorities and carries full approval for use in potable water
  • Splice joints provided for ladders over 6m
  • Polyester pultruded sections.
  • Full technical design service
Key Features:
  • Grey or alternatively yellow
  • GRP safety walk through extensions or stainless steel retractable handholds
  • Grade 316 stainless steel Fixings and brackets
  • BS EN 14396: 2004
  • BS 4211 1967
  • BS 5395 Part 3 Code of Practice

Ladder Add-On’s & Accessories

GRP Return Mounted Handhold Extension
GRP Return Mounted Handhold Extension
Stainless Steel Retractable  Walk-Through Handhold Extension
Stainless Steel Retractable  Walk-Round Handhold Extension
GRP Safety Cages
Scroll to Top